QSFP28 CWDM 100G 2km Transceiver
QF28-C4G100-02
QSFP28 CWDM 100G 2km Transceiver
产品描述:

The QSFP28 CWDM 100G optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four Distributed Feedback Laser (DFB) with 1271, 1291, 1311, and 1331nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.

● 100GBASE-LR4

● Infiniband QDR and DDR interconnects

● 100G Datacom connections


● Duplex LC receptacle optical interface

● Single +3.3V power supply

● Hot-pluggable QSFP28 MSA form factor

● 4x25G Electrical Serial Interface

● Compliant with 4x28G(CEI-28G-VSR)

● Transmitter: uncooled 4x25Gb/s CWDM DFB TOSA (1271/1291/1311/1331nm)

● Receiver: 4x25Gb/s PIN ROSA

● Low power dissipation(Max:3.5W)

● Built in digital diagnostic function

● Operating case temperature range:0℃ to 70℃

● Compliant with 100GBASE-LR4

● I2C Communication Interface

● Distance:2km

● Data Rate:100Gb/s

● Low End Case Temperature (°C):0

● High End Case Temperature (°C):70

● Diagnostics:Digital

● Transmitter:DFB TOSA

● Receiver:PIN

● Voltage Supply:3.3

● Connector:LC

● Wavelength:CWDM Band