QSFP28 LAN-WDM 100G 10km Transceiver
QF28-QG100-10
QSFP28 LAN-WDM 100G 10km Transceiver
产品描述:

The 100G QSFP28 LR4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.

  • 100GBASE-LR4
  • Infiniband QDR and DDR interconnects
  • 100G Datacom connections




  • Duplex LC receptacle optical interface
  • Single +3.3V power supply
  • Hot-pluggable QSFP28 MSA form factor
  • 4x25G Electrical Serial Interface
  • Compliant with 4x28G(CEI-28G-VSR)
  • Transmitter: cooled 4x25Gb/s LAN WDM DML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
  • Receiver: 4x25Gb/s PIN ROSA
  • Low power dissipation(Max:3.5W)
  • Built in digital diagnostic function
  • Operating case temperature range:0℃ to 70℃
  • Compliant with 100GBASE-LR4
  • I2C Communication Interface


  • Distance:10km
  • Data Rate :100Gb/s
  • Low End Case Temperature (°C):0
  • High End Case Temperature (°C):70
  • Diagnostics:Digital
  • Transmitter:DML
  • Receiver:PIN
  • Voltage Supply:3.3
  • Connector:LC
  • Wavelength:LAN-WDM Band